NanoPi Interface Feature

On NanoPi board, it have the follow interface:

• Two UART Serial Port
• Two IIC bus
• Two SPI bus
• One DVP Camera interface
• One TFT LCD interface
• One Touchscreen interface
• Up to 15 GPIO interface, more interface can be use as GPIO(UART, SPI, IIS, I2C)

More NanoPi interface info, download the NanoPi-2 schematic file.

NanoPi Interface Details

GPIO1 Pin Define

Pin#	IC Pin	Note		Pin#	IC Pin	Note
1	VDD_SYS_3.3V	Power Out 3.3V		2	VDD_5V	Power In 5V
3	I2C0_SDA	I2C bus 0 Data		4	VDD_5V	Power In 5V
5	I2C0_SCL	I2C bus 0 Clock		6	DGNA	Power GND
7	GPIOB28	GPIO		8	UART3_TXD	UART3 TXD
9	DGND	Power GND		10	UART3_RXD	UART3 RXD
11	GPIOB29	GPIO		12	GPIOB26	GPIO
13	GPIOB30	GPIO		14	DGND	Power GND
15	GPIOB31	GPIO		16	PWM2	PWM2
17	VDD_SYS_3.3V	Power Out 3.3V		18	GPIOB27	GPIO
19	SPI0_MOSI	SPI Bus 0 Master Output		20	DGND	Power GND
21	SPI0_MISO	SPI Bus 0 Master Iutput		22	PWM0	PWM0
23	SPI0_CLK	SPI Bus 0 clock		24	SPI0_CS	SPI Bus 0 Chip select
25	GND	Power GND		26	PWM1	PWM1
27	I2C1_SDA	I2C bus 1 Data		28	I2C1_SCL	I2C bus 1 Clock
29	GPIOC8	GPIO		30	DGND	Power GND
31	SPI2_CLK	SPI Bus 2 Clock		32	GPIOC28	GPIO
33	SPI2_CS	SPI Bus 2 Chip select		34	DGND	Power GND
35	SPI2_MOSI	SPI Bus 2 Master Output		36	GPIOC7	GPIO
37	SPI2_MISO	SPI Bus 2 Master Iutput		38	ALIVEGPIO2	GPIO
39	DGND	Power GND		40	ALIVEGPIO3	GPIO

 

RGB LCDIF Pin Define Pin# IC Pin Note 1,2 VDD_5V Power Out/In 5V 11，20，29,27-10,45 DGND Power GND 3-10 Blue LSB to MSB TFT LCD Blue Signal 12-19 Green LSB to MSB TFT LCD Green Signal 21-28 Red LSB to MSB TFT LCD Red Signal 30 GPIOB25 IO 31 GPIOC15 IO 32 XnRSTOUT From CPU Reset signal 33 VDEN Data Enable 34 VSYNC Vertical Sync. Signal 35 HSYNC Horizontal Sync. Signal 36 LCDCLK LCD Video Clock 41 SCL2 IIC 42 SDA2 IIC 43 GPIOC16 IO Debug Port CON1(UART0) Pin# IC Pin Note 1 DGND Power GND 2 VDD_5V Power Out/In 5V 3 TXD0 UART0: Debug serial Port TXD 4 RXD0 UART0: Debug serial Port RXD

DVP Camera IF Pin Define Pin# IC Pin Note 1,2 VDD_SYS_3.3V Power Out 3V 7,9,13,15,24 DGND Power GND 3 SCL0 I2C bus 0 Clock 4 SDA0 I2C bus 0 Data 5 GPH13 IO 6 GPJ12 IO 8 XCLK Clock 10 NC No Connector 11 VSYNC sync signal 12 HREF HREF 14 PCLK PCLK 16-23 Data bit7-0 Data bus

 

Mechanical Dimensions

More Mechanical Dimensions, download the NanoPi-2 dxf file.